Applications of 316L Stainless Steel
InstaPressFit TM Stainless Steel offers a broad choice of suitable piping systems and fittings for open or closed potable water and process water systems. All systems components are available in 316L grade and are completely corrosion resistant. We produce complete product ranges using top-rank productions processes and fulfil the most stringent requirements. Our products have all major national and international quality and approvals.
Heating and cooling
InstaPressFit TM has the best solutions for heating and cooling systems. Thanks to their design and the production process, the fittings do not have sharp edges inside, therefore they have a very low flow resistance and noise level. The compact fittings are very easy to insulate.
Easy installation, security and top quality are our primary focus at InstaPressFit TM .
Solar installations are systems where temperatures in the summer can reach very high temperatures, but the installation will be subject to very low temperatures in the winter time. To cover both the high and low temperatures different additives are added to the water to prevent the water from freezing and to efficiently transfer the heat to the heating installation of the building. These conditions make solar installations one of the more severe applications in piping systems. InstaPressFit TM has several systems in the assortment you can apply carefree in solar installations.
For compressed air installations InstaPressFit TM offers numerous solutions. InstaPressFit TM and compressed air are a combination used very frequently. Depending on water and oil content different choices in material and O-rings are available. Installations instructions Obviously the compressed air piping systems need to be properly tested after installation. The system designer and installer should provide a safe test method, which meets all current health and safety regulations. For further instructions, please refer to the technical documentation.
InstaPressFit TM offers the ideal solution for steam applications. Stainless is for example suitable for low pressure steam systems, which depending on the maximum temperature of the steam can be installed with the standard EPDM O-ring (up to 135°C, short term 140°C) or with a special grey FPM O-ring especially suitable for high steam temperatures. Fast, gas-tight sealing ensures safe and reliable connections and is an excellent alternative to commonly used welded joints. InstaPressFit TM also supplies systems for industrial steam applications without rubber seals. This means that you can reach even higher pressures and temperatures.